Completing Your Order

Click on the titles below to fill out the form(s) applicable to your order.

If you have any questions you can always call us at 503-610-2929 or email us at production@atomicdisc.com.

 

Upload Audio for CD Project

AUDIO FILE SPECS:

  • Total length cannot exceed 79 minutes
  • All audio files need to be 44.1 kHz, 16-bit
  • Preferred audio file types: WAV, AIF, AIFF, DDP*
  • Other acceptable audio file types: AAC, FLAC, MP3, M4A, physical CD master mailed to us

24-bit audio files may cause pops and clicks when converted to 16-bit for audio CDs. Please make sure your audio files are 16-bit.

UPLOAD INDIVIDUAL TRACKS

OR


UPLOAD DDP

* DDP (Disc Description Protocol) is a proprietary format for creating audio disc masters. Windows or MAC software is required. We recommend HOFA.

Upload Audio for Vinyl Project

AUDIO FILE SPECS:

  • 33 1/3 rpm 12” Vinyl - Maximum Time: 23 minutes per side
  • 45 rpm 12” Vinyl - Maximum Time: 15 minutes per side
  • Preferred audio file types: 16-bit or 24-bit WAV, AIF or AIFF
  • Other acceptable audio file types: AAC, FLAC, MP3, M4A, physical CD master mailed to us

Upload Video Files for DVD Project

VIDEO FILE SPECS:

Preferred video file types: Audio_TS/Video_TS directories (from an authored Video DVD), ISO, or DVD Data files.

We don't recommend .avi, Quicktime (.MOV), .MPEG or .mp4. These file types will play on a computer, but will not play in a DVD player.

Upload Print Ready Graphics Files

GRAPHICS FILE SPECS:

Click on each item below for more information.

Your graphics should conform to our templates

You can find our templates on our Templates page.

Create all graphics in CMYK

There are two main color modes. CMYK and RGB. The basic rule of thumb; CMYK is used for printing, RGB is for looking at things on a screen.

CMYK stands for cyan, magenta, yellow and k (which is black). CMYK is also what is often referred to as four color or process color.

It is important that you work in the CMYK color model or mode as it is referred to in some graphics programs. What generally happens if you work in RGB, is that your printed graphics come out looking a little duller and less saturated than what you see on the screen.

Create all graphics at 300 dpi or higher

Dots per inch, or dpi is how the resolution of digital images are measured. 300 dpi is typically the minimum required to get good printing results.

Imagine that there are tiny dots of ink on the paper. The more dots per inch you can have, the more detailed and clear your images will be. So make sure your document settings and scanner settings are set to at least 300 dpi (sometimes referred to as ppi 'pixels per inch') to get your graphics looking as good as possible.

Embed fonts or convert fonts to paths

You will need to convert your text to paths, or create outlines before you submit us your finished artwork. This will ensure that the fonts you chose will in fact be used and not substituted by our system in case we don't have the specific fonts you used.

Here is the terminology used by various programs:

Photoshop - Not necessary (but the term is Rasterize type)
Illustrator - Create outlines
InDesign - Create outlines
Corel - Convert to Curves
Publisher - Embed fonts

Hide template layer before flattening

Please make sure to turn off, hide, or delete the template layer before sending us your finished artwork. Many times we get artwork files sent to us with the template image flattened in, or embedded in the final artwork. This is a no,no. No one wants pink lines and cut marks to print on their beautiful artwork.

Accepted formats: .psd .eps .tif .pdf .jpg .ai .indd

We can accept the following graphic file formats: .psd, .eps, .tif, .pdf, .jpg, .ai .indd

A high resolution, flattened PDF file is preferred and can be exported from almost any graphic design software. (Remember to hide your template layer before flattening for .pdf)

Mastering Form for CD Project

  • Preferred file types: WAV, AIF, AIFF (all other file types such as MP3, FLAC, M4A will be converted)
  • Any bit rate is acceptable
  • For the best result, make sure your file types match your original recording settings. For example if you recorded at 24-bit, 44.1 kHz, then provide your files at those specs
  • If you prefer to mail us a hard drive, thumb drive or data CD/DVD containing your files, please see the address below and mark your shipment with your order number

Mastering Form for Vinyl Project

AUDIO FILE SPECS:

  • 33 1/3 rpm 12” Vinyl - Maximum Time: 23 minutes per side
  • 45 rpm 12” Vinyl - Maximum Time: 15 minutes per side
  • Preferred audio file types: 16-bit or 24-bit WAV, AIF or AIFF
  • Other acceptable audio file types: AAC, FLAC, MP3, M4A, physical CD master mailed to us

Graphic Assistance Form

GRAPHIC ASSISTANCE INSTRUCTIONS:

Fill out the Graphic Assistance Form to:

  • Upload the images you want us to use *
  • Type out the text you want us to put on each panel of your CD package
  • Give us directions about color preferences, placements of elements, text alignment, etc.
  • Specify which fonts you want us to use

* Images should have a resolution of at least 300 dpi. Dots per inch, or dpi is how the resolution of digital images are measured. Imagine that there are tiny dots of ink on the paper. The more dots per inch you can have, the more detailed and clear your images will be. Low resolution files tend to print blurry or pixilated.

Please make sure your document settings and scanner settings are set to at least 300 dpi (sometimes referred to as ppi 'pixels per inch') to get your graphics looking as good as possible. We cannot make your images higher resolution than the original files you send us.

Graphic Design Form

GRAPHIC DESIGN INSTRUCTIONS:

Fill out the Graphic Design Form to:

  • Upload the images you want us to use *
  • Type out the text you want us to put on each panel of your CD package
  • Give us directions about color preferences, style, placements of elements, text alignment, etc.
  • Let us know if you have any font preferences

* Images should have a resolution of at least 300 dpi. Dots per inch, or dpi is how the resolution of digital images are measured. Imagine that there are tiny dots of ink on the paper. The more dots per inch you can have, the more detailed and clear your images will be. Low resolution files tend to print blurry or pixilated.

Please make sure your document settings and scanner settings are set to at least 300 dpi (sometimes referred to as ppi 'pixels per inch') to get your graphics looking as good as possible. We cannot make your images higher resolution than the original files you send us.

 

Proofing & Payment

Proofing Mastering

We will email you your mastered tracks within 10-15 business days.

For vinyl projects, mastering needs to be approved before we proceed to manufacture test pressings.

Proofing Print Ready Graphics and Graphics Assistance

After you have submitted all your files we will prep your graphics and send you .pdf proofs via email within 1-2 business days. You will have to reply to that email saying you approve, before we start production. If you need to make changes to your files after seeing your proofs, please let us know by replying to said email. Such changes might delay your project.

Proofing Graphic Design

After you have submitted all your files we will prep your graphics and send you .pdf proofs via email within 2-3 business days. You will have to reply to that email saying you approve, before we start production. If you need to make changes to your files after seeing your proofs, please let us know by replying to said email. Such changes might delay your project.

Payment

If you selected "Start Now - Pay Later" as your payment method you will be sent an invoice via email after art approval. Use the link in the email to submit payment using either VISA, MasterCard, American Express or PayPal. Your invoice needs to be paid in full before we can ship your order. For vinyl projects we require a 50% down payment before we can proceed with test pressings. The balance needs to be paid in full before we can ship your order.

Production Time and Ship Date

Once we receive your art approval, we will start production and email you an estimated ship date. We will email you again with a tracking number as soon as the shipping label has been generated. You are welcome to call us at (503) 610-2929 any time during your order process to get updates. We thank you for choosing us!

 

A link to this page was emailed to you once you placed your order.
If you wish to mail us your files on a CD, DVD, USB or hard drive, please write your order number on it and send to:
Atomic Disc LLC | 1288 Liberty St. NE | Suite 170 | Salem, OR 97301

Liquid error: Could not find asset snippets/captions.liquid